A sliding barn door usually slides right along the wall and is often completely out of the way during operation. Basically, unlike the swinging doors, this kind of door normally can open in deep snow, and can be hassle free opened even when objects are in front of the barn. However, this is not usually the case when it comes to swinging doors. For a person to allow for easier opening and hence prevent warping of his or her styles or tracks, he or she requires building the doors lighter than the regular barn doors. This write up will focus on discussing about the various tips on how to build sliding barn doors for homes as well as the various steps you can make use of when installing them, which will assist as in comparing these kinds of doors with the swinging ones.


Tips on How to Build a Sliding Barn Door: DIY Interior Sliding Barn door Hardware


Tip#1: Cutting the Boards:-


Cut carefully your 4- by- 2 boards to the width and height of your barn door in order to create the frame. If you’re in need of stronger frames, all you need to do is to double stack the 4- by- 2 boards or make use of 4- by- 4 inch beams. Generally, this is ideal since it will add plenty of weight, thus consider whether it is really necessarily to have the extra strength.


Tip#2: Assembling the Frame:-


Assemble the frame carefully using galvanized screws or nails and metal braces. Cut a cross brace and then install it in the middle of your frame. Note that for the larger barn doors, it is most probably that a person may require using a diagonal cross brace in every half of the frame.


Tip#3: Cutting your Planks to the Height:-


Cut your planks carefully to the height of your barn door and then lay them on your frame. Afterwards, attach them to your barn door frame using nails or screws that have been galvanized. Make use of a dab of adhesive or wood glue for added strength.


Tip#4: Mounting the Sliding Barn Door Track:-


Mount the sliding barn door track carefully to the top of frame. To make this process easier, it is always recommended that you use a carpenter level that is very accurate. Use power driver and wood screws to mount the track to your barn door frame.


Tip#5: Mounting Track Wheels:-


Mount four to five track wheels on the bottom of your barn door, if your door is going to be sliding across the ground level. However, if the bottom of your door happens to be higher than the foundation, which is often the case of the barn door which has got an entry ramp, try to mount another sliding track on the very bottom of your door. Basically, the tracks can hassle free be located in anyplace on the frame edge. However, this is not usually the case when it comes to sliding doors.


Tip#6: Measuring the Distance that is Between the Mounted Tracks:-


Measure distance which is in between the mounted tracks, and then carefully install the tracks for your barn walls. It is important that you ensure that you double check each and every measurement, and then if necessary remount. Is the process of making a sliding barn door really hard? Guess No.


Despite having a look at the process of making barn doors, it is ideal also that we take a closer look on the procedure that is usually involved in installing them.

sliding door for homes with custom rooms

Steps on How to Install a Sliding Door


If you’ve managed to construct a sliding door, make use of the following steps when time for installation comes:




Line up the rollers along the bar door’s top edge approximately one foot apart. With a marker or pen, mark the holes in the base of every roller on your door while it’s in position and then drill the holes.




Using heavy- duty 2- inch wood bolts or screws which often comes with the rollers, attach your rollers. Make use of a dab of adhesive or wood glue when you’re installing the rollers.




Mark and then drill holes for 2 more rollers on the bottom of your barn door, and then install them as described in the immediate previous step.




Measure carefully the whole height of your barn door and then write down their exact measurements. Apply these measurements to the opening of your barn door. If for instance it’s 11 feet 4 inches, measure 11 feet 4 inches from the bottom of your barn door opening, and then use a marker to make dark marks.




Line up effectively the middle of your trolley track using these marks over your barn door opening, and then make larger marks on the mounting holes present in your trolley tracks.




Look for any helper who’ll hold for you the trolley track in place on one of the sides and then attach carefully the track to your barn door, using a power driver or a drill.




Lay properly the bottom track along the floor of your barn door. Straighten it well using a level and then test the alignment of the track using a plumb bob. Hold appropriately the string of your plumb bob in middle of your trolley track, and then let the weight dangle properly above the floor. Then position the bottom track in order to make it appear right under your plumb bob. Generally, this will make sure that the two tracks are aligned perfectly.




Cap both of the ends of your trolley tracks by simply drilling a hole into your track (if one isn’t already in place) and drive a large ¼ bolt carefully into this hole. Note that you can thread the bolt via a block of 1×1’ wood if you want to create a stronger stopper. Or also you can use the stopper that is included in the sliding door trolley. However, this is not often possible when you’re installing the sliding doors.


Last but not the least: it is essential that if you want to experience the effectiveness of the aforementioned tips and steps when it comes to constructing and installing sliding barn doors in order to experience their effectiveness. Thank you.

Leave a Reply

Optimization WordPress Plugins & Solutions by W3 EDGE